All Types of Padding

§ Padding for the bottom of slides

§ Padding for transitions between uneven surfaces

§ Padding for the side of a pool

§ Padding for play areas

§ Padding to protect patrons from any sharp or rough surfaces

§ Padding for structures & bridges across lazy rivers

Other Information

Custom Logos

Photo Gallery

Impact, Transition & Pool Side Padding

Sam's Fun City - FL:  Pool Side Padding

All Types of Padding: Made in USA We manufacture all types of impact, transition and pool side padding custom made to your specifications. Typical padding is constructed with 1" to 2" high density, closed cell foam completely encased in heavy-weight, reinforced material with brass anchoring grommets placed around pad perimeter and a protective flap that covers grommets when installed. As an option extra chafe material can be added to increase pad longevity and abrasion resistance.

Colors:  Padding is available in a wide variety of colors. You can choose a single color or mix and match any color combination.

Impact Pad at Slide Bottom

Slide Bottom Impact Padding: Designed to be placed at the bottom of slides to reduce the impact to the rider's bottom and provide a more comfortable landing. Standard pad includes anchoring grommet holes around the entire perimeter of pad.

Pool Side Padding:  Designed to be placed on the pool sidewall to cover the edges of the pool or waterway. Pads are typically placed at entrance and exit points, along the edge of slide run-outs or at any other area that needs protected.

Pool side pad is constructed to form a 90 degree angle to provide protection all around the pool edge.

Anchoring:  Most impact pads and pool side pads are anchored in place with drop-in concrete anchors. We provide all hardware needed to install your pad including Stainless Steel Drop-in Anchors, SS Fender Washers and SS Screws. We recommend that you only use stainless steel hardware for anchoring.

Custom Sizes: All padding is custom made to fit your specific location.